I was sent pictures of a classic Tama steel snare. I carved this ring as a one piece wax with shell, rims and lugs combined. After casting, I laser welded the tension rods on.
View more of my made to order drum rings at
This was an exciting drum ring commission for me. I have been doing custom jewelry for 24 years. Atlas Jewelers is a trusted part of our community and I am happy and blessed to be creating jewelry here in my town. I primarily meet every person that I make a ring for and I get to know them through the process of making them jewelry. But Steve contacted me via the web and was one of my first commissions since the launch of MusicianRings.com, and I probably will never meet him. Steve is highly passionate about drumming and was starting a new chapter in his life by getting married. I am thrilled to see that my musician rings, that I love so much, are reaching out so much further than our neighborhood. I have since made guitar rings and sent them out to Germany and Australia. Totally mind blowing to me.
We discussed the many options and planned out the ring. I carved a wax, what was to become the shell and rims, as one piece and also carved a long bar which would eventually be cut up to be the lugs.
Each was cast in 14K super white gold.
I sanded and polished the comfort fit band to a mirror finish.
Each lug was cut, filed and polished.
The 10 lugs were polished, positioned and laser welded in place.
I drilled a hole in the rim for each tension rod and laser welded the 20 gauge wire into place for a crisp, tight appearance.
I just love how it turned out.
Thanks Steve, and keep on drumming.
Here is another cool custom snare drum wedding ring. It all started when I saw his Drum Workshop shirt and asked him if he has one of those awesome drum sets. He does. (I’m so jealous).
I showed him my drum ring and the next thing you know, his wife says that he has to have one. Lucky guy. We got to work on his drum ring.
This 14k yellow and white gold ring is made up of 28 parts. The shell and rims were milled in wax. I did them in different color waxes just to help us in the shop keep straight the color of metal each were to be cast in.
Shown here is the shell, rims and lugs assembled after casting. The lugs were fabricated from a rod of white gold, cut into little slabs. Each was concave to have as much contact with the shell as possible . It took about an hour just to space out the 8 lugs and to laser tacked them in place. Then I soldered them on at the bench with a torch.
The 14k white gold 20 gauge wire used for the tension rods were laser welded in place.
A florentine graver was randomly used to give a wood grain effect.
You can check my whole website dedicated to drum and guitar rings.
But here is how I made my last order:
I use a Wolf Wax attachment to turn a #35 foredom hand piece into a mini router. I first ream out the tube to the desired finger size and then shape the wax to a plain basic band.
By changing the large cylinder bur to a wheel bur, I milled the step of the “rim” of the hoop. I Flipped the wax over and repeat the cut.
I marked out 8 equal lines for the placement of the lugs and tension rods.
For this design, I carved the lugs in the wax. By doing the rims, shell and lugs in one piece, it dramatically cut down the labor of assembling individual parts in metal. (Which I have done on some drum multi colored gold versions.)
Here is the finished wax after texturing the shell with a 1.0 mm ball bur for the finish the customer custom ordered.
The wax model is sprewed on to a rubber base and a metal cylinder is placed over that.
A special plaster is poured into the flask. When the plaster hardens the rubber base is removed, exposing the ends of the wax sprew. The flask is placed in a kiln. As the temperature rises, the wax melts out, leaving a cavity of exactly what was carved.
The molten metal is “shot” into the flask with the aid of a centrifuge.
Here is a flask just after casting.
When you dunk the mold in water, the plaster breaks down.
Here is the rough casting with the sprew and “button”. You always need to carefully calculate how much metal you use to cast with. Too much, and molten metal would go flying out after overfilling the mold. Too little, and the ring is incomplete or plagued with porosity. (Small voids)
The ring is cut off of the button and goes through a process of sanding and polishing. The button can be used in the next casting along with the addition of more new metal.
I am working on the tension rods. Holes are drilled and wire is soldered in place.
Jim Edwards from the Rockets showing off his Detroit pride with his Atlas Jewelers “D” ring. Chad Smith showing off his marriage pride.
The Chad Smith Pearl SignatureSeries snare drum.
I carved the wax pieces and cast them in their respective metals. I assembled the 14k yellow “shell” and 14k white gold “rims”.
I hand fabricated the “lugs” from a rolled ingot and made the “tension rods” from wire. I also made a 14K rose gold name plate.
More drum and guitar jewelry, rings and wedding bands can be seen at http://MusicainRings.com
I have a series of drummer and guitarist rings that I have created for musicians. They can be seen at MusicianRings.com. As a drummer myself, I have really enjoyed creating the drum rings. I wanted to show off a bit with a higher level of detail, complexity and realism. I carved the wax “shell” and “rims” and cast them in yellow and white golds to best show contrast of the parts. They were sanded and soldered together. I hand fabricated the “lugs” from a slab of white gold and laser welded them in place. I hand florentine the “shell” in a random pattern to give a natural wood grain look and feel. Then I drilled holes in the rim and laser welded on the sixteen “tension rod” wires.
I can custom make any drum ring. Here is the Chad Smith Pearl Signature Series drum.
If you have any questions about having a ring made for you, contact me at the store, or visit the website for more details.